Konig Electronic SEC-DVR202S Anleitung Seite 8

System-Hard Disk Setup:
OVERWRITE ENABLE:
Select "Yes" to continue recording and overwriting
previous recordings when the HDD is full.
Select "No" to stop the recording when the HDD is full.
It will not record until "Overwrite enable" is set to "Yes".
FORMAT HDD:
Formatting the hard disk drive deletes all stored video
data. The system has no restore option once the
hard drive is formatted. When selecting this option,
the system will prompt to enter the password before
formatting. The default password is "111111".
System-Account Setup:
Only user login at admin level allows the account setup
for the administrator and to add new users, delete
existing users and modify user name, password and
level. The system allows up to 4 user accounts.
Account/Password:
In the setup menu navigate to Account to change the
highlighted option, then press the "Select" button to
access Account/Password as shown. All numbers,
letters and characters in the table can be used as user
account or password. Press "Select" to input the value
and navigate to "Enter", press the "Select" button to
confirm.
CH1=Up / CH2=Down / CH3=Left / CH4=Right, press
"Shift" for changing characters.
Level:
Navigate to Level and then press [Select] to adjust the
user level (operator/guest).
8