Konig Electronic SEC-DVR202S Anleitung Seite 10

To playback by event list use "Up"/"Down" or channel
(CH3=Up or CH4=Down) on the remote control, select
the event for playback and press the "PLAY" button.
Alternatively navigate with the mouse up and down,
click (◄=Up or ►=Down) to select the event for
playback, double-click to play.
System-F/W Upgrade:
This menu serves firmware upgrade of the DVR system via USB host (USB memory stick). Simply
upgrade the system after connecting the USB stick containing a firmware file.
CAUTION:
1. Do not turn the system off during upgrade. Otherwise it will cause malfunction and needs a special
recovery process.
2. If no HDD is installed, the system cannot be upgraded.
3. Stop recording before upgrading the system.
Language:
The system supports multi-language OSD. Select the
on-screen display between English, Italian, Polish, Spanish,
French, Greek, German, Dutch, Portuguese and Turkish.
In the "Language" menu navigate to the desired language and
press the "Select" button on the remote control; alternatively
navigate with the mouse and click to select the language.
Logout:
Use this option to log out of the system.
Exit:
After changing the settings in the DVR menu, you need to
confirm the changes in the EXIT menu.
EXIT & SAVE CHANGE:
Save changes and return to the main menu.
EXIT & DISCARD CHANGES:
Discard the changes and return to the main menu.
LOAD SETUP DEFAULT:
Load default settings.
PLAYBACK WITH TIME SEARCH FUNCTION:
This is an enhanced playback option, which enables you
to manually set a specific starting time for playback.
Keypad Control:
In order to playback with time search function, press the
"PLAY" button on the remote control. Press the "Select"
button to change the playback start date & time and
press the "PLAY" button again. The playback will start
from the date & time entered.
10