Konig Electronic SEC-DVR202S Anleitung Seite 4

Move the mouse up or down to move the cursor. Click to change the settings or right-click to return to
the previous menu.
DVR Remote Control:
After system boot-up, press the "MENU" button on the remote control to display the login window.
There is one factory-preset login "account/password" "admin/111111" at admin level. Use it to login for
the first time.
After login press the "MENU" button to change the DVR settings; the menu as shown in Fig. (b) is
displayed. Press "UP" or "DOWN" buttons on the remote control to move the cursor. Press the "Select"
button on the remote control to change the settings. Press the "MENU" button on the remote control to
return to the previous menu.
Overview Menu:
Camera
Record
Alarm
Screen
System
Search
Language
Logout
Exit
Camera:
Use this option to adjust the video color for each
channel (1, 2, 3, 4). Navigate to DISPLAY option
to enable or disable the display of each camera.
Modify the camera name for each channel.
Record:
Use this option to select the channel (1, 2, 3, 4) for recording. Only the selected channel will be
recorded, no matter how many camera channels are displayed on the screen.
RECORD FRAME RATE:
Use this option to change the record frame rate for
each channel. The higher the record frame rate,
the more natural movement you will see during
playback.
Each channel frame rate adjustment can be made
independently.
Hard disk setup
Account / Password setup
Clear account info
Logout
Keypad tone
Time set
Event list
F/W upgrade
4