Usb Interface Port; Data Line Protection Connectors; Ups Intelligent Communications - Sola Hevi Duty S3K2U series Handbuch

8.3

USB Interface Port

The S3K2U has a USB interface port for communication that will work with the built-in Microsoft
Power Manger software on the user's PC, if so equipped. It will provide UPS status and manages the
automatic orderly shutdown of the computer. The UPS's USB communications meet HID standard,
version 1.11. All USB models are compatible with Microsoft Windows 2000, Windows XP and Mac OS
10.2 or later. All USB models ship with a 1.8m (6 ft) USB cable.
8.4

Data Line Protection Connectors

Data line (in and out) connectors are on the rear of the UPS and provide transient voltage surge sup-
pression (TVSS) for Phone/Fax/DSL/Internet/Modem devices.
8.5

UPS Intelligent Communications

The S3K2U is equipped with an Intellislot
options.
MultiLink software continually monitors the UPS and can shut down your computer or server in the
event of an extended power failure.
MultiLink can also be configured for use without the serial cable when the Intellislot SNMPWEB-
CARD is installed in the UPS. Additionally, MultiLink can be configured to coordinate shutdown
across the network with other computers running MultiLink when you purchase a MultiLink License
Kit. For more information about the Intellislot SNMPWEBCARD and MultiLink License Kits, visit
our Web site (www.solaheviduty.com) or contact your local distributor, Sola/Hevi-Duty represenative
or Sola/Hevi-Duty Technical Services.
Several option cards are available for use in the Intellislot port of the S3K2U. The Intellislot SNMP-
WEBCARD provides SNMP and Web-based monitoring and control of the UPS across the network.
The Intellislot MultiPort 4 Card allows you to install MultiLink software on four computers and coor-
dinate shutdown in the event of a power failure.
The RELAYCARD-INT provides dry contact relay outputs for custom-wired applications and delivers
support for built-in shutdown for AS/400 systems.
NOTE
The USB, Intellislot and Contact Closure communications operate in parallel. Using the
SNMPWEBCARD disables the Serial Communications of the DB-9.
CAUTION
!
To maintain safety (SELV) barriers and for electromagnetic compatibility, signal cables
should be segregated and run separate from all other power cables, where applicable.
®
port to provide advanced communication and monitoring
24
Communications