Hama Fluxity Bedienungsanleitung Seite 5

g Operating instructions
I. Presentation
Thank you for choosing the "Fluxity" induction charger
from Hama. Congratulations on your decision.
We are sure that our product will provide you with a
great deal of gaming pleasure for years to come. These
instructions contain valuable information on operating
the charger.
Please keep the instructions in a safe place for future
reference.
II. Extent of delivery
1 x „Fluxity" induction charger
1 x NDSI XL case for „Fluxity" induction charger
III. Brief description
The „Fluxity" NSDI XL induction charger from Hama
charges using a magnetic field. This way, it is possible
to leave the Nintendo DSI XL in the case (included in the
extent of delivery). All of the buttons of the Nintendo DSI
XL can be operated while the device is in the case. The
original power supply unit must be used to charge the
DSI XL. (Not included in the extent of delivery)
IV. Installation
1. The „Fluxity" induction charger must be operated
using the original Nintendo DSI XL power supply unit.
Plug the original power supply unit into the power
supply unit socket of the charging station. Connect the
original power supply unit to the power socket. Switch
the ON/OFF button on the charging station to „ON".
2. Open the case (included in the extent of delivery) and
place the Nintendo DSI XL inside so that the plug
inside the case comes into direct contact with the
charging socket of the DSI XL.
4
3. Open the upper screen of the Nintendo DSI XL and
attach it to the top lid of the protective sleeve.
4. Place the case with the Nintendo DSI XL inside onto
the charging station, near the centre. The charging
indicator of the Nintendo DSI XL begins to light up
orange. Charging begins.
5. The charging indicator of the Nintendo DSI XL goes
out when the rechargeable battery is fully charged.
Charging is complete.
6. The Nintendo DSI XL may be used while it is charging.
*Nintendo DSI XL not included in extent of delivery.
*
*
*