Bose BASS MODULE 700 Handbuch Seite 5

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is
in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation
(EU) No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at 230V/50Hz
input
Time after which equipment is automatically switched into mode
Power consumption in networked standby if all wired network
ports are connected and all wireless network ports are activated,
at 230V/50Hz input
Network port deactivation/activation procedures. Deactivating
all networks will enable standby mode.
For Europe:
Frequency band of operation 2400 to 2483.5 MHz:
• Wi-Fi: Maximum transmit power less than 20 dBm EIRP.
Frequency bands of operation 5150 to 5350 MHz and 5470 to 5725 MHz:
• WiFi: Maximum transmit power less than 20dBm EIRP.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member
States listed in the table.
BE DK
BG DE
CZ EE
This symbol means the product must not be discarded as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this product.
REG U LATORY I N FO R MAT IO N
IE UK FR
PT EL HR
FI ES IT
Standby
< 0.5 W
< 2 hours
N/A
Per Annex II 3(a) of Regulation 801/2013 ("Lot 26"
amendment of 1275/2008), the requirement to deactivate
a wireless port "does not apply to products which rely on a
single wireless network connection for intended use and have
no wired network connection."
CY SK
LV LT
RO LU
|
5 E N G
Power Modes
Networked Standby
Bose Wireless < 2.0 W
< 20 minutes
< 2.0 W
HU AT
MT PL
NL SI
SE