English - Braun 5602 Bedienungsanleitung

English

Our products are designed to meet the highest standards of quality,
functionality and design. We hope you enjoy your new Braun appliance.
Warning
• Keep the appliance dry.
• This appliance is not intended for use by children or persons with
reduced physical, sensory or mental capabilities, unless they are given
supervision by a person responsible for their safety. In general, we
recommend that you keep the appliance out of reach of children. Children
should be supervised to ensure that they do not play with the appliance.
• Batteries may leak if empty or not used for a longer time. In order to
protect you and the appliance, please remove batteries in a timely
manner and avoid skin contact whilst handling leaking batteries.
Description
1a Small distance comb (trimming
beard and short hair)
1b Large distance comb (cutting hair)
2 Cutter system
a beard trimming/hair cutting
b release buttons
Batteries
This appliance operates on three 1.5 volt batteries type LR 6, AM 3,
MN 1500, AA. For best performance, use alkaline manganese batteries
(e.g. Duracell).
A Inserting the batteries
Open the battery compartment by pressing the release button (6).
Insert the batteries with the poles in the direction marked (A) and close the
battery compartment by clicking it in.
Using your beard trimmer
B Beard trimming
• Place the small distance comb on the beard trimmer while the on/off
switch (3) is on position «0».
• To start trimming, press the on/off switch and push it up to the desired
beard length. You may choose between 6 settings: approx. 1, 3, 6, 9, 12,
16 mm.
• It is advisable to begin with the highest setting (position «6») and then
reduce the setting until you reach the desired beard length.
6
3 On/off switch
(with beard length selector) (4)
5 Battery compartment
6 Release button