Sie wie folgt vor: Stellen Sie sicher, dass der TV-Monitor eingeschaltet ist. • Schalten Sie den Hauptschalter auf der rechten Seite der PCS-1/PCS-11 auf EIN. • Einschalten der PCS-1/PCS-11 aus dem STANDBY-Modus Wenn die Anzeige STANDBY auf der Gerätevorderseite orange leuchtet, gehen Sie wie folgt vor: Stellen Sie sicher, dass der TV-Monitor eingeschaltet ist.
Seite 4
SONY PCS-1/PCS-11 QUICKSTART Microphone ON/OFF Standby Loudness Microphone Zoom Tele/Wide FarEnd Video Input Select FarEnd Camera Control Picture in Picture Navigation Button Menu/Konfiguration Setup Return Connect/Disconnect Alphanumeric Keys Help...
Seite 5
Press the main power switch on the right side of the PCS-1/PCS-11. • Waking up the PCS-1/PCS-11 from STANDBY-Mode If the standby LED on the front of the PCS-1/PCS-11 is lit, proceed as follows: Make sure the monitor is switched on. •...