Shure 520DX Bedienungsanleitung

GENERAL
Contoured to fit comfortably in the palm of your hand,
the Model 520DX "Green Bullet" microphone produces the
unique sound that has made it a legend among harmonica
players.
The 520DX features a volume control knob at the base
of the microphone (see Figure 1) that allows musicians to
make adjustments to suit their needs during a live perfor-
mance. An attached cable with a standard 1/4-inch phone
plug allows the microphone to be connected to a high-imped-
ance device.
APPLICATIONS
Connect the 520DX directly into a guitar amplifier to
produce the classic blues harp sound. Use the following
guidelines:
The volume control on the microphone should be turned
down before pluging it into an amplifier. As you move
away from the amplifier, the volume can be turned up.
Adjust the microphone's volume control knob during
performances as needed. For example, when switching
from playing rhythm to lead or to place the microphone
on standby between sets.
To avoid feedback, maintain as much distance as pos-
sible from monitors or loudspeakers. Adjust the volume
of monitors or loudspeakers at the mixing console so
that no feedback is present when the volume control
knob on the harmonica microphone is at its maximum
setting.
1997, Shure Brothers Incorporated
27A2929 (QE)
English: Print 1-2
Shure Brothers Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
520DX Harmonica Microphone ("Green Bullet")
User's Guide
NOTE: The volume setting of the guitar amplifier may have
a significant effect on the overall tone produced. Experiment
with different microphone and amplifier volume settings to
achieve the desired effect.
VOLUME CONTROL
VOLUME CONTROL KNOB
LOW IMPEDANCE
To connect the 520DX to a low impedance device, such
as a mixer, use a low-to-high impedance-matching line
transformer, such as the Shure model A95U.
NOTE: The 520DX can be rewired for low impedance, but
this disables the volume control. Contact the Shure Applica-
tions Group at (847) 866-2525 for more information.
SPECIFICATIONS
Type
Dynamic
Frequency Response
100 to 5,000 Hz (Figure 2)
TYPICAL FREQUENCY RESPONSE
OFF
FIGURE 1
FIGURE 2
Printed in U.S.A.