Use And Operation - Klarstein Steeletto Handbuch

EN
12
10
Fit the light kit to the
switch housing by
using the three light kit-
fixing screws and star
washers. Ensure that you
do not trap any wires.

USE AND OPERATION

• Select the fan speed by pressing the speed control button on the remote control
transmitter: HI: High Speed - MED: Medium Speed - LOW: Low Speed - OFF: Off.
• The switch on motor housing for controlling the fan blades rotating direction controls
the direction of air movement.
• Caution: Before using this rotating direction switch, turn OFF the fan and ensure the
fan stops rotating to prevent injury to yourself and damage to the motor.
• Cold weather: Push the switch "UP" so that the blades will bring the warm air
trapped near the ceiling fan to move downwards throughout the room.
• Hot weather: Push switch "DOWN"so that the blades will create a breeze and
circulate the air to the room.
• Pressing the "ON/OFF" light button on the remote control transmitter can control
the turning on or off of the light.
11
Install the light bulb. (R7s
Max 80W, not supplied)
12
Install the lampshade
onto the lamp gallery by
rotating the lampshade
clockwise.