Use And Operation - Klarstein Charleston Bedienungsanleitung

EN
12
10
Insert light kit cover onto
the light kit and secure
with three set screws.

USE AND OPERATION

• Turn electricity on before the fan start to work.
• The fan starts to operate when pulling the Three-speed Switch connected by an
extension chain on the motor housing.
• Pulling the "ON/OFF" Light Switch connected by an extension chain on the motor
housing can con- trol the turning on or off of the light.
The fan can be in different speeds as pulling the Three-speed Switch:
• The first pulling = HIGH SPEED
• The second pulling = MEDIUM SPEED
• The third pulling = LOW SPEED
• The fourth pulling = OFF
11
Install the shade onto the
switch housing.
12
Install a light blulb (E27
MAX.60W, not supplied)
to the lampholder.Switch
the power on to check
the operation of the light
kit and fan.