Key Display And Buttons; Functionality; First Use And Unique Machine Code - CEMO CMT10 Bedienungs- Und Wartungshandbuch

3.3 KEY DISPLAY & BUTTONS
cover
display
„total"-button
TAG reader
„reset"-button
3.3.1 SYMBOLS
simple pression
3.4

FUNCTIONALITY

Software is divided in 2 modes:
USER: can ben navigated using the
buttons by anybody and this without any access
key or TAG. It allows to visualize the total per
authorized user and see blocked users as well as
the PERIOD TOTAL and GENERAL TOTAL.
MASTER: only accessible with the MASTER card,
this mode allows full control of device's functions,
allows setup of TAG/ Users (max 250) limits, pro-
gram TAGs with their limitations, authorize and/or
block TAGs, choose the unit of measure, calibrate
the meter, cancel data in memory and change
default settings.

3.4.1 FIRST USE AND UNIQUE MACHINE CODE

The device has been designed to always stay ON
if powered; each having its own machine number
set to 0 as default. When the manager presents
its MASTER card at first use, the device will reg-
ister its machine number inside the software. This
machine code will be unique and will be used to
body
battery alert
symbol
continued pression
and
display
„total"-
button
TAG
reader
„reset"-
button
body
bring user TAGS
configure the user TAG keys that are part of that
system and that can only be used with that system.
For this reason, if a user TAG has to be used
with multiple devices, it is critical to use only one
MASTER card to configure these multiple devices,
giving so to all of them the same machine code.
Once installation is complete, it is recommended
to calibrate the meter for better accuracy (see
paragraph 3.4.1.7). It will also be necessary to
program the user TAG keys to authorize refuelling
(see dedicated paragraphs). Remove the transpar-
ent protection on meter display.
GB
cover
battery alert
symbol
bring card master
9