Guarantee And Liability; Safety Instructions; Requirements For Personnel - SATA clean RCS compact Betriebsanleitung

Operating Instructions for SATA RCS
US
1.2. Replacement parts, accessories and parts subject to
wear
Always use genuine SATA replacement parts and accessories. Acces-
sories not supplied by SATA have not been tested and approved. SATA
cannot assume any liability whatsoever for use of parts and accessories
which have not been approved.

1.3. Guarantee and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA cannot assume any liability for
■ Failure to observe the operating instructions.
■ Use of untrained personnel.
■ Use of the product for purposes other than intended.
■ Failure to use personal protective equipment.
■ Failure to use genuine parts and accessories.
■ Unauthorized conversion or technical modification.
■ Natural wear and tear.
■ Stress from shock or impact not typical for use.
■ Impermissible assembly and disassembly work.

2. Safety Instructions

Read and observe all of the instructions below. Failure to observe or in-
correct observance can lead to malfunctions and severe injury.

2.1. Requirements for personnel

The compressed-air powered SATA clean RCS units are intended for use
only by skilled personnel with appropriate training who have fully read and
understood these operating instructions. Work with the SATA clean RCS
units by people whose reactions are impaired as a result of dugs, alcohol,
medications or for other reasons is prohibited.
2.2. Personal protective equipment (PPE)
When using, cleaning and maintaining the SATA clean RCS units, always
wear approved respiratory protection, eye protection and ear protection
as well as appropriate protective gloves, work clothing and protective
shoes.
2.3. Use In Explosive Areas
The SATA clean RCS units are approved for use / storage in potentially
explosive atmospheres classified as Ex-Zone 1 and 2.
420