Warranty And Liability; Safety Instructions - SATA clean RCS compact Betriebsanleitung

Operating Instructions SATA RCS
EN
1.2. Replacement, accessory and wear-and-tear parts
In principle, only original replacement, accessory and wear-and-tear parts
from SATA are to be used. Accessories that were not delivered by SATA
are not tested and not approved. SATA assumes no liability whatsoever
for damages incurred due to the use of unapproved replacement, acces-
sory and wear-and-tear parts.

1.3. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ non-adherence to the operating manual.
■ use of untrained personnel.
■ unintended use of the product.
■ personal protection gear not being used.
■ original accessory and spare parts not being used.
■ independent conversions or technical changes.
■ natural wear and tear.
■ abnormal impact.
■ impermissible assembly and disassembly work.

2. Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
2.1. Requirements regarding personnel
The pneumatic SATA clean RCS may only be used by experienced skilled
workers and instructed persons who have thoroughly read and under-
stood these operating instructions. People whose reactions have been
adversely affected by drugs, alcohol, medication or by any other means
are prohibited from handling SATA clean RCS.
2.2. Personal protection gear (PSA)
Always use approved breathing and eye protection, hearing protection
and protective gloves, workwear and safety boots when using SATA clean
RCS and during cleaning and maintenance work.
2.3. Use in explosive atmospheres
SATA clean RCS are approved for use / storage in explosive atmospheres
of ex-zone 1 and 2.
Zone code:
102