Establish A Second Tx Bluetooth ® Connection; Change Volume/Mute; Disconnect Tx Bluetooth ® Connection; Charge Device - Imperial BART mini Bedienungsanleitung

6. COMMISSIONING AND OPERATION
established, the indicator LED will continuously light up green.
6.6.2. Establish a second TX Bluetooth
The BART mini allows you to pair 2 Bluetooth
same time.
To connect a second receiving device, proceed
as follows:
Press the Bluetooth
The LED indicator flashes green again.
Switch on the Bluetooth
a second connection.
Once the connection to a Bluetooth
established, the indicator LED will continuously light up green.
6.6.3 Change volume/ mute
Press and hold the function button (2) to increase the volume.
Press and hold the function button (3) to decrease the volume.
Briefly press the multifunction button (1) to mute the sound.
Press the multifunction button (1) again briefly to unmute the
sound.
6.6.4 Disconnect a TX Bluetooth
To disconnect
Bluetooth receiver device, hold the Bluetooth
®
for approx. 3 seconds.
The device is now in pairing mode again and is searching for new
Bluetooth connections. The LED indicator blinks blue.
®

6.7. Charge device

If you disconnect the device from the USB power supply, the de-
vice is operated by the internal battery.
Once the internal battery is drained, the LED light will blink red.
® function key (4).
receiver with which you want to establish
®
receiver device is
®
connection
®
the Bluetooth
52
® connection
receivers at the
®
connection
®
function key (4)
®
to your