Connecting The Device; Protecting The Device Against Damage - Imperial BART mini Bedienungsanleitung

2. SAFETY INFORMATION

2.4. Connecting the device

Only use the device with a USB power adapter that fulfills all
regulations necessary
If using a USB power adapter, please keep the power source
(socket) easily accessible.
Do not bend or squeeze any cables.
Before using the device, check whether the voltage specification
on the device corresponds to your local power voltage. The
specifications on the power unit must correspond to the local
power grid.
Only plug the device's power adapter into a properly installed
grid socket with 220-240 V alternating current, 50-60 hz., or, if
using a USB port as power source, please make sure that this
USB port only delivers 5V 1A DC output.
Place the device on a solid, even surface.
The device consumes power in standby mode. To fully switch off
the device, the power plug must be pulled from the socket or
the power unit on the back of the device must be switched off.

2.5. Protecting the device against damage

Unfavourable surrounding conditions, such as moisture, excessi-
ve heat or a lack of ventilation may damage the device.
Only use the device in dry rooms. Avoid direct proximity to heat
sources, such as radiations, open fires (e.g. from candles),
devices with a strong magnetic field, such as loudspeakers.
41