Receiver Mode (Rx) - Imperial BART mini Bedienungsanleitung

6. COMMISSIONING AND OPERATION
Blinks blue
Continuous blue light
Blinks green
Continuous green light BART mini turned on.

6.5 Receiver mode (RX)

Connect to an audio device, such as a HiFi system or AV amplifier.
Depending on the inputs of the device to be connected,
use the optical or analogue audio cable. (Both cables are included
in the scope of delivery).
Please make sure that you have selected the appropriate input
source on the device to be connected.
Switch the MODE switch (10) to RX.
If you are using an SPDIF cable, switch the signal switch (11) to
SPDIF and use the SPDIF OUT jack.
When using an analog signal via AUX, set the signal switch (11)
to AUX.
BART mini turned on.
RX (receive mode active)
No Bluetooth device connected.
®
Bart mini is waiting for a Bluetooth
connection
BART mini turned on.
RX (receive mode active)
Connection to a Bluetooth
established.
BART mini turned on.
TX (transmission mode active)
Bart Mini searches for a Bluetooth
nection with a Bluetooth
TX (transmission mode active)
Connection to a Bluetooth
established.
49
®
device
®
® con-
® receiver
receiver
®