Spdif Out - Imperial BART mini Bedienungsanleitung

4. OVERVIEW AND CONNECTIONS
6. Micro USB
Plug in the included USB cable included and connect the cable
with a USB power source.
7. AUX inlet/ AUX outlet
Connect an analog audio source via the included 3.5 mm jack/
cinch cable from which you want to transfer the music via the
BART mini to another device. (e.g. MP3 player/smartphone/
UKW tuner/satellite receiver etc.)
or
Connect an audio device that has an analog inlet with the included
3.5 mm jack/ cinch cable to play music received by the BART mini
(e.g. HiFi amplifier).
8. SPDIF IN
Connect a digital audio source, which has an optical digital output,
with the supplied optical digital cable to transfer music from the
audio source via the BART mini to a Bluetooth receiver.
®

9. SPDIF OUT

Connect an audio device that has an optical digital input with the
supplied optical digital cable to play music received by the BART
mini.
10. Mode switch
Switches the device from
RX (receive mode) to TX (send mode).
11. Signal switch
Use this switch to switch between an analog input/output signal
via AUX and a digital input/output signal (SPDIF).
46