Herunterladen Inhalt Inhalt Diese Seite drucken

Unitec 10 006 Bedienungsanleitung Seite 8

Hydraulischer rangierwagenheber
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Movable hydraulic jack
Caution...
Once raised, always support the load with additional support blocks. Never use the hydraulic jack
alone to support a load. Before using this jack for the first time please read the operating and
maintenance instructions carefully.
Technical data...
Lifting height:
Load:
Operation...
1. Before using the jack:
With the release valve 1 for the locking device
using at least six forceful pumping strokes activate the hydraulic system to distribute the oil
evenly.
2. To lift the load:
Close the release valve by turning it clockwise
Make sure that the load is centralised on the loading cup 3.
Then operate the jack
3. To let down the load:
Open the release valve 1 by turning it slowly anticlockwise.
Turn the valve so that it is open but not out of its base.
Remarques...
1. Dans l'intérêt de votre propre sécurité, ne dépassez pas la charge maximale du cric hydraulique.
2. Employez uniquement le cric pour soulever des charges qui seront ensuite soutenues par des
tréteaux appropriés.
3. Soulevez uniquement des véhicules parfaitement immobilisés: serrez le frein à main et placez des
cales sous les roues.
4. Utilisez le cric hydraulique uniquement sur des surfaces planes et stables, sinon, la charge risque
de glisser.
5. Always support the load in the middle of the holding stand 3
6. La soupape de sécurité est réglée d'usine et ne nécessite aucun réglage ultérieur.
7. Warning: Warning: The jack is only intended for raising a motor vehicle.Prior to servicing or
repairing the motor vehicle, the load has to be supported using underside stands rated
according to the actual load.
8. The load on the jack must not exceed 2 tonnes (4,500 lbs), because otherwise the jack may be
damaged (e.g. due to mechanical overstress)Thus people may be at risk.
9. Please use it only on solid surfaces because on soft ones it may not be stable and the load can
.
get damaged
Tegro 10006 Bedienung.indd 9
135 mm – 342 mm
2000 kg
3
.
G
1
open, slide the handle into the socket 2 and
2
.
.
3
7
05.07.12 13:41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Unitec 10 006

Inhaltsverzeichnis