Specifications - Unitec 10 006 Bedienungsanleitung

Collapsible underside stands for cars

Specifications:

Max. load for each underside stand: 2,000 kgs
Max. support height: 360 mm
Min. support height: 270 mm
Using the jack:
1. Set the underside stand to the required level
and then insert the pin into the locking hole.
Attention:
1. Do not exceed the maximum permissible load (2,000 kgs) for the underside stand.
2. To lock it, only use the pin supplied.
3. Secure the raised vehicle so that it won't roll off.
4. Use the underside stands only on solid and level surfaces.
5. Use an underside stand to support the vehicle only at its specified points.
6. Keep clean and dry.
7. Do not use damaged underside stands.
Tegro 10006 Bedienung.indd 11
G
2. Always completely press down the folding
mechanism of the legs.
9
7
05.07.12 13:41