Operating Determinations; Features - Omnitronic TUBE C-10 Bedienungsanleitung

Never install the powered mixer next to highly sensitive devices like pre-amplifiers or tape-decks, as the
strong magnetic field of the integrated amplifier can produce hum in these devices. The magnetic field is
strongest directly above or below the power mixer.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

3. OPERATING DETERMINATIONS

This device is a Vacuum Tube Condenser Microphone. This product is allowed to be operated with an
alternating current of 115 V or 230 V AV, 50 Hz and was designed for indoor use only.
This device is designed for mobile use and for permanent installations.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
The ambient contamination must never exceed level 1 and must not be conducting, only dry.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the speaker-system are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, hearing loss etc.

3.1 Features

The TUBE C-10 is the best value available today in studio tube condenser microphones–with the classic
vintage look and the same extraordinary sound and performance of a legendary vacuum tube microphone, at
a fraction of their original cost. For the first time, the superior technology of these classic microphones is
affordable even to the most modest project studios. With the superior rugged construction and unparalleled
warmth, presence, and clarity of the original classics–but with unbeatable affordability—the TUBE C-10
studio vacuum tube condenser microphone delivers both superb sound and unsurpassed value.
11/14 13000465_V_1_1.DOC