HANSGROHE AXOR Citterio 39620000 Montageanleitung Seite 40

Where the contractor mounts the product, he
should ensure that the entire area of the wall
to which the mounting plate is to be fitted, is
flat (no projecting joints or tiles sticking out),
that the structure of the wall is suitable for
the installation of the product and has no
weak points.
The enclosed screws and dowels are only
suitable for concrete. For another wall
constructions the manufacturer's indications
of the dowel manufacturer have to be taken
into account.
The filter insert (A) must be used to ensure the
standard flow rate and to protect the hand
shower against incoming dirt by pipework. Do
you want a larger water flow rate, then you must
use the filter packing (B) instead of the filter
insert (A).
Incoming dirt leads to defects or/and can
damage parts of the hand shower; such caused
faults voids all liability and guarantee claims.
8
Assembly
Hansgrohe showers can be used together with
hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa in front of the shower fitting. In
this case don´t insert the Waterdimmer®.
Important! The non return valves must be
checked once a year.
anti-pollution function