Assembly And Installation [Specialist] - PAW DN 25 Montage- Und Bedienungsanleitung

4 Assembly and installation [specialist]

NOTICE
Damage to property!
The location of installation must be dry, load-carrying and frost-proof to prevent material
damage to the installation.
B-6
The fitting for heat flow meter is mounted
in the return line of the heating circuit.
The flow sensor for the heat quantity
measurement can be mounted in the flow
thermometer ball valve [A-2] or in connections
required on site by using one of the enclosed
reducers.
The sensors and the heat flowmeter are
not included in the scope of delivery!
Please observe the instruction manual of
the heating circuit for the deinstallation of
the insulation.
993x453-mub-ml – V02
4 Assembly and installation [specialist]
2018/01