Qualcomm® Aptx™ Low Latency; One-Touch Connection (Nfc); Using As A Wired Headphone - Avantree BTHS-AS90P Bedienungsanleitung

Qualcomm® aptX™ Low Latency
aptX-Low Latency delivers high quality 16bit audio while minimizing audio/video syncing issues. To take advantage
of this feature, please ensure that the audio source device or the transmitter also supports the aptX-Low Latency
codec. To check if your device is aptX-LL certified,visit aptX's website: www.aptx.com.
We recommend any of the following Avantree Bluetooth transmitters - Oasis Plus, Audikast, Leaf to ensure
compatibility with the AS90P.

One-touch connection (NFC)

Turn on the NFC function on your Android smartphone (Android 4.1 or later) and ensure that the screen is active
and unlocked.
Power on the headset, keep touching the smart phone with the headphones "N" Mark until the smart phone
reacts.
Follow the on-screen instructions to complete the pairing and connection. When the headset has been connected
to the smart phone, you'll hear voice prompt "connected."

Using as a wired headphone

You may use the supplied 3.5mm audio cable to connect to a non-Bluetooth device.
Note: The control buttons, the built-in mic, and the detachable boom mic DOES NOT work in wired mode.
Note: If you wish to use the ANC function in wired mode, please turn on the headphones first.
5