AUDIOropa xepton T-1R Bedienungsanleitung Seite 19

the transmission. All devices must be set to the same channel group number
and each transmitter device must have its own ID number, with one transmit-
ter device having the master-ID „00".
4.4 Pin-layout XLR
4 Pin XLR on the front panel
5. Specifications xepton T-1R
Device type
Dimensions
Weight
Frequency type
Transmission mode
Transmission power
Voice codec
RX-sensitivity
Latency
Data rate
Frequency bandwidth
Power
Power consumption
Range
Frequency response
3 Pin XLR on the rear panel
Transmitter
45 x 220 x 220 mm (H x W x D)
1360 g
ISM 2403 - 2480 MHz
ISM 2.4 GHz FSK modulation with frequency
hopping
Maximum 10 mW
16bit / 8 KHz
-95 dBm
< 35 ms
2 Mbps
2 MHz
USB 5V/DC / 1A
200 mA
up to 350 m
50 Hz - 7 kHz
English 19