Börner V5 Power Bedienungsanleitung Seite 6

Position 1: Position 2: Position 3:
very thick thick thin
slices slices slices
Position 4: Position 5:
really thin child-proof lock
slices („SAFE")
3,5 mm- and 7 mm-insert
Both the 3,5 mm- and 7 mm-inserts are adjustable in
height and can be used in two positions as follows:
Choose your favourite insert
and slide it into the frame
with the arrows on both the
frame and the insert mat-
ching. The insert now is auto-
matically in position 1. In this
position you can cut strips.
If you would like to cut thin-
ner strips or cubes, push the
insert forward until it clicks
into position. Using light
pressure, slice with a conti-
nuous up and down motion
for thinner strips.
For dicing fruits or vegetables,
turn the Safety Holder 45° before
the first cut, and after each cut
90° back before cutting again.
45°
90°
Release the insert by pushing the
coloured button and the insert
with light pressure as shown in
the picture. In this position the
arrows on both the frame and
the insert match and the insert
can be removed.
Cleaning
Rinse the VPower and the inserts under warm or cold
running water with the plain insert in position 5 („SA-
FE").
CAUTION Be careful not to touch the metal blades.
Also rinse the Safety Holder (B) under running water.
Place the wet VPower and inserts into the Storage Box
to drip dry.
CAUTION Never leave any of the V-Slicer parts in soapy
water in case you inadvertently touch the blades while
trying to remove them from the water.
CAUTION ALWAYS store your VPower out of the reach
of children.
Not recommended for automatic dishwashers, as high
temperatures and strong cleaning agents could cause
damage, reducing the lifespan of the product.