Jumper Settings - Exsys EX-1184HMV Anleitung

English EX-1184HMV
3. Layout, Connections & Jumper Settings

3.3 Jumper Settings

The EX-1184HMV will be delivered with the setting Bus-Power. But you have the pos-
sibility to cut the power at the data line. For this you open the case with the four
screws on both sides. Then you must set the jumper JP1 from BUS (Bus-Powered) to
SELF (Self-Powered). See the following picture.
JP1
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
12