REV Ritter Vivo Bedienungsanleitung Seite 18

11. Help
Defect
Gong does not operate
Gong does not operate
Gong does not operate
Gong sounds without a
radio trigger from the
transmitter
no signal trigger from
transmitter
no signal trigger from
transmitter
no operation with USB-
module
USB-module does not
play the stored melodies
correctly
Melodies from the sound
module are not played
A different melody is
played than before after
the batteries have been
replaced
12. Cleaning
only use a slightly moist cloth to clean the surface, or if necessary a very cleaning
agent. Do not use any scouring or solvent cleaning agents.
Cause
Batteries perhaps empty
Batteries perhaps inserted
incorrectly
Incorrect coding
Possible other radio signals
on the same code
Batteries possibly empty
Batteries perhaps inserted
incorrectly
USB inserted incorrectly
Possibly incorrect file
format
Sound module not inserted
correctly
Play data store has been
deleted
Remedy
replace 3 x 1.5V AA
Mignon batteries
Insert batteries as shown
taking care to ensure
correct polarity
ensure transmitter and
receiver are set to the
identical code
Alter both the transmitter
and receiver to a different
identical code
replace batteries
Insert batteries as shown
taking care to ensure
correct polarity
remove the USB-module
and refit it correctly
Check to ensure the files on
the USB-module corre-
spond with the file formats
listed in the characteristics
remove the sound module
and refit it correctly
The gong must be set
again using the selection
keys
17