Selecting The Bell Mode; Adjusting The Volume; Operation With Sound Module; Operation With Usb-Module - REV Ritter Vivo Bedienungsanleitung

9. Selecting the Bell Mode

If the sliding switch  is in the A1 position the gong plays the selected melody
when the transmitter is actuated and activates a vibration alarm at the same time. If
the sliding switch  is in the A2 position, only the vibration alarm is activated. If the
sliding switch  is in position A3, only the set melody sounds when the transmitter
is actuated.

10. Adjusting the volume

Four different volumes can be selected in stages by pressing the „VoL" button (1)
in the gong.
note: on changing the batteries or changing a module respectively the volume is
automatically reset to „LoUD " and must be adjusted if required.

11. Operation with sound module

By using the sound module (not included) additional polyphone melodies or sounds
can be played when in the „K3" mode. Insert the sound module into the expansion
slot (Fig. 3) and carry out the melody selection as explained in point 6.

12. Operation with uSB-module

By using a USB-module (not included) your own choice of polyphone melodies
(midi/wave) can be played in „K3" mode.
Install the USB software from the düwi homepage (www.duewi.de). Insert the USB-
module with download function into the USB hub of your computer and use the
software to load the desired music file from your computer onto the USB-module.
Insert the USB-module into the expansion slot (Fig. 4) and carry out the melody
selection as explained in point 6.
Characteristics
16
• USB Version 1.1 /2.0, 512KB storage
• Compatible with Windows 2000, Windows XP
• Supports MIDI (.mid) and WAVe (.wav) file formats
• Saves 64.wav/.mid files
• File format to be converted to MIDI (.mid)
or WAVe (.wav)
• Compulsory:
- freeware (download from www.duewi.de)
- Windows Media Player 9.0 or higher