Program Titles - Medion MD 80271 Handbuch

CD-Porty_80271.book Seite 16 Freitag, 17. Dezember 2004 11:08 11
P CD/MP3
LAYING BACK

PROGRAM titles

UK-16
DISCS
You can program the playback for sequences of up
to 32 tracks. This is only possible in standby mode.
(if required, press PLAY once and STOP once).
Programming CD titles
In standby mode, press the MODE button. The
display shows P for "PPROGRAM", three digits
000 for the title and the first program position
P-001.
Within 60 seconds, use the
select the title to be stored in program position 01.
Press the MODE button to save the track.
Program position 02 will appear.
Within 60 seconds, use the
select the title to be stored in program position 02
and press MODE to store the title.
Proceed in the same way to add further tracks to
the list.
Programming MP3 titles
In standby mode, press the MODE button. The
display will show a P for "PROGRAM", two digits,
000for the folder, three digits 000 for the title and
the first program position P-001. The digits 000 for
the folder will flash on and off.
Within 60 seconds, use the
select a folder.
Press the PROG button to store the folder. The
digits 000 for the track will flash on and off.
Within 60 seconds, use the
select a track.
Press the MODE button to save the track. The
digits 000 for the folder are now activated.
Proceed in the same way to add further tracks to
the list.
buttons to
buttons to
buttons to
buttons to