Mode Button; Repeat Button; Power Switch - auna Moving 80.1 LED Handbuch

15 MODE BUTTON: Press once to change the current access
device of the unit.
(USB interface - SD card reader - BLUE TOOTH) the unit
priority read USB interface, SD card reader
16 REPEAT BUTTON: There are 2 preset repeat modes. Press once
to repeat single, that "REP." will be lit at bottom right corner
of the screen. Press it again and unit will be on repeat all, that
"REP." will be put out.
17

POWER SWITCH

Note: that while the unit is connected to a power source, it
does not need to be powered on to charge the battery. If the
battery cannot be continue to use, please contact Supplier
open the hatch for changing battery. Battery specifications for
12VDC 5.0AH.
18 POWER CABLE INPUT (IEC): Insert the included power cable
here to charge the unit. that the unit can run off the power
adapter while it simultaneously charges the battery. The
charge indicator is lit when the battery is charging.
19 FUSE FOR AC POWER: Use this fuse to protect the unit & EXT.
power supply.
EN
21