auna Moving 80.1 LED Handbuch Seite 23

BT CONNECTION
1. Turn on your Bluetooth device.
2. Power on the unit. If you have previously connected to another Bluetooth
device,the unit will reconnect.
3. Navigate to your Bluetooth device's setup screen, find "Moving-80.1"
speaker" and connect.
(Note: If your Bluetooth device prompts for a pairing code, enter "0000".)
4. To disconnect pairing while the Bluetooth icon is lit solid, press the mode
button.
5. To connect to another Bluetooth device, repeat step 3.
TROUBLESHOOTING
Problem
Distorted sound
Too much bass
High-pitched whistling nose
when using the microphone.
Solution
Try lowering the volume
control of your sound source,
musical instrument,
or microphone. Also, try to
reduce the overall volume
of the unit using the Master
Volume knob.
Try adjusting the tone or EQ
control on your sound source
to lower the bass
level. This will allow you to
play the music louder before
clipping distortion occurs.
This is probably feedback.
Point
the microphone away from
the speaker.
EN
23