Before First Use; Temperatur Setting - Klarstein Garfield Handbuch

BEFORE FIRST USE

• Before use, remove all packing materials, including bottom cushions, foam pads
and tapes inside of the freezer; tear off the protective film on the doors and the
freezer body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or
watery places to prevent rust or reduction of insulating effect.
• Do not spray or wash the freezer; do not put the freezer in moist places easy to
be splashed with water so as not to affect the electrical insulation properties of the
freezer.
• The freezer is placed in a well-ventilated indoor place; the ground shall be flat, and
sturdy (rotate left or right to adjust the wheel for levelling if unstable).
• The top space of the freezer shall be greater than 70 cm, and The freezer should
be placed against a wall with a free distance more than 20 cm to facilitate heat
dissipation.
Note: Before using the appliance for the first time, wash the interior and accessories
with lukewarm water and a little detergent to remove the typical smell of the new
product. Dry the interior and all parts carefully afterwards.

TEMPERATUR SETTING

Plug the plug into the socket. The thermostat has 3 settings: Min, Max and Normal. MIN
is the least cold settings, MAX the coldest settings.
Note: If the ambient temperature is very high or the door is opened often, the desired
temperature may not be reached.
EN
19