Klarstein Beerlocker S Bedienungsanleitung Seite 12

EN
12
Operation
It is recommended that you installed the wine cooler in a place where the ambient
temperature is between 10-26°C .If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected. For example,
placing in extreme cold or hot conditions may cause interior temperature to fluctuate.
The range of 7-18°C may not be reached. The temperature may fluctuate depending
on whether or not the interior light is on or off or whether the bottles are located on the
upper, middle or lower section.
How to set the temperature
There is mechanical control inside
cabinet, rotate the knob to adjust
temperature.
1 Light button
2 Temperature adjust knob
3 LED
• There is TEMP-ADJ knob inside of wine cooler. The temperature is ad- justed in the
range if 7-18°C in the cabinet.
• The TEMP-ADJ button is set certain point when the cellar is off the assembling line.
When you want to low down the temperature in the cabinet, please turn the TEMP-
ADJ knob from left to right for cooling capacity of 'High" to "Medium" to "Low".
In first use of the wine cooler, turn the knob to "High" to low down the temperature
quickly.
• There is light switch in the control control panel, push to set the light on/off.