ADJUSTMENT FOLDING MECHANISM
E
FOR MORE RIGID FEEL
Use Allen Key number 2.5 to release tension on both sides of M4 screws
as shown on Figure 1.
Then use Allen Key number 2 and gently tight both screws as shown on
Figure 2.
Test the function and only then, tight back both sides of M4 screws
as shown on Figure 3.
FOR EASIER FOLDING
Use Allen Key number 2.5 tor release tension on both sides of M4 screws
as shown on Figure 1.
Then use Allen Key number 2 and gently release tension on both screws
as shown on Figure 2.
Be aware that the distance is only a few millimetres. Be careful that
screw will not fall out of their place.
Test the function and only then, tight back both sides of M4 screws
as shown on Figure 3.
SUMMARY
TIGHT = RIGID MECHANISM
LOOSE = EASY FOLDING
LOOSE
TIGHT
3 0