Riding Operation; Getting Ready - SXT-Scooters Light Plus V eKFV Handbuch

E

3.4 RIDING OPERATION

Getting Ready!

1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions and make sure the safty pin is engaged.
3. Adjust the T-pipe to the suitable height according to your height.
Start
1. Press the power button to turn on the power.
2. Stand one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will immediately move forward
slowly. Place the previous foot on the scooter. Press the right thumb accelerator with your right
thumb. The greater pressure you put, the faster it will go.
Brakes
1. Under normal conditions, the right thumb brake lever is pushed down and the electromagnetic
brake is activated and the scooter immediately slows down and the flow of energy to the engine
is interrupted. The more the brake lever is pushed down, the more the scooter brakes. The
electromagnetic brake additionally activates the kinetic energy recovery system (KERS), which
feeds the braking energy back into the battery in the same way as with Fomel 1 cars.
2. The Scooter also have a conventional mechanical foot brake at the rear. The mechanical brake
slows down the scooter on the rear axle. No matter what situation you are in - if the first system
fails, you still have the mechanical foot brake on the rear axle at your disposal.
3. The "SXT Light Plus V eKFV models" have a brake lever on the right handle that can be pulled.