Westfalia VSC-18 Bedienungsanleitung Seite 31

4. Adjust the amount of steam with the steam controller (1). Turn the steam
controller in direction MIN for less steam and in direction MAX for max.
possible steam.
When changing the accessory, always keep in
mind that all parts and the steam cleaner become
hot during operation. There is risk of scalding!
Allow the parts to cool down sufficiently and
always grasp the accessory with a cotton cloth or
oven gloves.
After work resp. if no steam is produced, press the ON/OFF switch and pull
the power plug to unplug from power mains.
The steam cleaner has to be refilled with water if less steam or no steam comes
out from the steam gun.
1. Switch off the appliance and pull the power plug from the socket. The green
power indicator light turns off.
2. Press the trigger several times to reduce the pressure inside the appliance.
Make sure not to scald yourself; keep in mind that all parts are hot after using
for long time.
3. Press the trigger again to reduce pressure resp.
to make sure that there is no pressure inside the
appliance. Engage the trigger by pressing the
child-proof lock (13).
4. Carefully unscrew the safety seal (6) by turning
counter clockwise and using a cotton cloth. Wait
for approx. 5 seconds before completely un-
screwing and removing the safety seal. There is
risk of scalding!
Do not fill more than the stated water quantity of 1.6 litres into the tank.
Operating
26