Preparation - Westfalia VSC-18 Bedienungsanleitung

1. Open the safety seal (6) by pressing down and
turning the seal counter clockwise for several
times. Remove the safety seal.
2. Fill water into the tank by using the included
funnel (26) and measuring cup (27).
Make sure the tank is empty before filling fresh
water. Pour a maximum of 1.6 litres water into
the tank. Please note that pouring hot water will
shortening heating-up time.
3. Press down and turn the safety seal clockwise
to screw the seal back onto the cleaner. Only
screw hand tight.
4. Connect the hose of the steam gun with the
hose connection (8) of the cleaner. First, pull
down the lid of the hose connection and insert
the plug of the hose into the opening as far as it
will go.
5. To remove the hose, press both release buttons
on the left and right side of the steam hose
connector inwards and pull out the hose.

Preparation

21