Melody Selection With Wired Gong Module; Melody Selection With With Radio Extension Kit - REV Ritter Arioso Bedienungsanleitung

10. Melody selection with wired gong module

The bell connected to T3 and T4 enables the gong to play a stipulated poly-
phone melody or alternating polyphone melodies.
On pushing the slide switch (7) to „SEQ" the „SEL" button (6) can be pressed to
select the desired polyphone melody. To ensure that the gong only plays this se-
lected melody the slide switch (7) must be pushed to the „SET" position without
having pressed any other buttons in the meantime. If the slide switch remains in
the „SEQ" position any random polyphone melody is played.
Note: On changing the battery or changing a module respectively the melody is
automatically reset to a standard melody and must be reset if necessary.
11. Melody selection with radio extension kit
If a radio module (radio extension kit, not included) has been inserted into the
slot then melody selection takes place via the transmitter (Fig. 5).
Slide switch : K1 – for 3-sound-tone, K2 – for Westminster-melody,
K3 – for polyphone melody
Slide switch : „SEQ" - for alternating melody at K3;
„SET" – to use a selected melody at K3
If slide switch  is at K3 then the gong plays a defined polyphone melody or
alternating polyphone melodies.
Pushing the slide switch  to „SEQ" enables you to select the desired poly-
phone melody by pressing the transmitter. To ensure that the gong only plays this
selected melody the slide switch must be pushed to the „SET" position without
having pressed any other buttons in the meantime. If the slide switch remains in
the „SEQ" position any random polyphone melody is played.
Note: On changing the battery or changing a module respectively the melody is
automatically reset to a standard melody and must be reset if necessary.
19