Access Counts - JVC MC-8100LU Bedienungsanleitung

11. ACCESS COUNTS

Access counts of the main unit (changer) and each unit (carrier, drives 1 - 4 and label printer) can be checked using this
function.
1.
In the normal display mode, press the MODE switch.
(The menu display appears.)
2.
Press the SELECT key 6 times.
("7. COUNT DISPLAY" appears.)
3.
Press the ENTER key.
(Select "7. COUNT DISPLAY".)
4.
Pressing the SELECT key changes the display.
1. TOTAL : The total access count for the Library.
2. CR : Carrier
3. MS : Mail slot
4. DR1 : Drive 1
5. DR2 : Drive 2
6. DR3 : Drive 3
7. DR4 : Drive 4
8. FL : Flip
Only when the MC-CF10U Optional Carrier is installed
s Access counts of unconnected drive units will appear as[------].
s The initial "TOTAL" access count from the factory may be "999880-999999".
s This data may be lost if the equipment is disconnected from the power source for more than six months.
1 . N O R M A L D I S P L A Y
2 . E R R O R D I S P L A Y
7 . C O U N T D I S P L A Y
8 . I M P O R T / E X P O R T
1 . T O T A L : 0 0 0 2 3 7
2 . C R : 0 0 0 1 7 9
2 . C R : 0 0 0 1 7 9
3 . M S : 0 0 0 0 2 0
SELECT
7 . D R 4 : 0 0 0 0 0 4
1 . T O T A L : 0 0 0 2 3 7
SELECT
1 . T O T A L : 0 0 0 2 3 7
2 . C R : 0 0 0 1 7 9
SELECT
E31