Ecom Tab-ex 01 Z2 Bedienungsanleitungen Und Sicherheitshinweise Seite 36

• When the battery power is low, the battery icon appears empty.
• If the battery is completely discharged, the device cannot be turned on im-
mediately when the charger is connected. allow a depleted battery to charge
for a few minutes before turning on the device.
• If you use multiple applications at once, network applications, or applica-
tions that need a connection to another device, the battery will drain quickly.
To avoid disconnecting from the network or losing power during a data trans-
fer, always use these applications after fully charging the battery.
Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of
the USB cable into the multipurpose jack.
Connecting the charger improperly may cause serious damage to the
device. any damage caused by misuse is not covered by the warranty.
• T he device can be used while it is charging, but it may take longer to fully
charge the battery.
• I f the device receives an unstable power supply while charging, the touch
screen may not function. If this happens, unplug the charger from the
device.
• W hile charging, the device may heat up. This is normal and should not
affect the device's lifespan or performance. If the battery gets hotter than
usual, the charger may stop charging.
36