Language; Register; De-Register - Silvercrest SGKT 50 A1 Bedienungsanleitung Und Serviceinformationen

LANGUAGE

Set the menu language for the handset as follows:

Press the  or  multifunction control buttons [4] to select the desired language (e.g.
"ENGLISH") from the list.

Press the Menu/OK button [12] to confirm your selection.

A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [2].

REGISTER

You can register up to 5 handsets with one base. By default, the handset supplied has already
been registered with the base. To register a de-registered or a new handset with the base, proceed
as follows:

Press and hold the Locator button [25] on the base for about 10 seconds. "REGISTER"
will appear on the display [17].

Press the  or  multifunction control buttons [4] on the handset to select the base from
the list to which you want to register the handset. Then press the Menu/OK button [12].

Enter your four-digit PIN code (default 0000) and press the Menu/OK button [12] to
confirm.

As soon as the handset has established a connection to the base, a beep can be heard
and the name and number of the handset are shown on the display [2].

DE-REGISTER

This menu item allows you to de-register a handset that is currently registered with the base.
Proceed as follows:

Enter your four-digits PIN code (default 0000) and press the Menu/OK button [15] to
confirm.

Enter the number of the handset that you want to de-register (1 to 5).

Press the Menu/OK button [15] to confirm your entry.

After the handset has been de-registered, a confirmation beep will sound.

Instead of the name of the handset, the de-registered handset display [2] will show
"NOT REGISTER".
If you have one handset only, it is only possible to de-register it from the base. For more
information, please read the "REMOVE HS" chapter on page 205.
SilverCrest SGKT 50 A1
English - 199