Teesa BPM 100 TSA8045 Bedienungsanleitung Seite 24

24
1. Attach the cuff to the arm as described in the "Attaching the cuff" section.
2. Press the ON/OFF button; the device is ready for taking measurement when 00
appears on the display.
3. The cuff will be inflated automatically; pulse icon flashes.
mmHg
Start
4. When the measurement is finished, systolic and diastolic blood pressure, pulse
EN
rate and classification of achieved result is displayed. Each result is stored in
the device's memory together with time and date.
READING STORED RESULTS
Press the MEM button to enter memory. Keep pressing the MEM button to switch
to the next result; keep pressing the SET button to switch to the previous result.
DELETING ALL RESULTS
Press and hold the MEM button for about 5 seconds to delete all results.
USING THE DEVICE
ON/OFF
mmHg
Inflating
MEM
Owner's manual
mmHg
Deflating
mmHg
End- result