Battery Installation; Setting Date And Time - Teesa BPM 100 TSA8045 Bedienungsanleitung

Owner's manual
1. Remove the battery compartment cover.
2. Insert the batteries with correct polarization (+/-).
3. Close the battery compartment cover.
Notes:
• Use only specified batteries.
• Do not mix batteries of different type.
• Do not insert the batteries with signs of leakage as it may damage the device.
• Do not short-circuit the batteries.
• Replace the batteries with the new ones when the low battery level icon
flashes.
• Replace all batteries at the same time.
• Battery lifespan depends on the ambient temperature and it may be shorter in
environments with lower temperature.
• Store the device without the batteries inside if it is not going to be used for
more than 3 months.
1. Press and hold the SET button until year flashes on the display.
2. Keep pressing the MEM button to set the year; press the SET button to save
and set the month.
3. Keep pressing the MEM button again to set the month. Follow the same steps
to set day, hour and minute.
SET

BATTERY INSTALLATION

SETTING DATE AND TIME

year month day hour
21
EN
minute