Terraillon TensioSmart Bedienungsanleitung Seite 43

Table 6
Recommended separation distances between portable and mobile RF
communications equipment and the EQUIPMENT or SYSTEM – for ME EQUIPMENT
or ME SYSTEM that are not LIFE-SUPPORTING
between portable and mobile RF communications equipment at the LS802-B.
The LS802-B is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the LS802-B can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmittters) and the LS802-B as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be determined using the equation applicable
to the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency range
applies.
NOTE 4 These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and refl ection from structures, objects and people.
GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO.,LTD
Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch
Development District, Zhongshan, Guangdong, 528437, China
MDSS - Medical Device Safety Service GmbH
EC REP
Schiffgraben 41, 30175 Hannover, Germany
Recommended separation distances
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d = 1.167
0.167
0.369
1.167
3.690
11.67
80 MHz to 800 MHz
d = 1.167
0.167
0.369
1.167
3.690
11.67
800 MHz to 2.5 GHz
d = 2.333
0.233
0.738
2.333
7.338
23.33
43