Fitting - P.Lindberg 9059961 Original Bedienungsanleitung

Fitting

Fitting wheels
WARNING – Risk of personal injury!
Ensure that the pin is completely closed.
WARNING – Risk of damaging the equipment!
Be aware of the wheel's direction.
The wheel's profile must turn in the direction of operation.
WARNING – Risk of damaging the equipment!
Always ensure the tyres are pumped up to the correct tyre pressure.
1. Push the safety ring (17) onto the wheel
axle (16).
2. Push the wheel (7) with the valve
pointing out onto the wheel axle (16). It
may be necessary to first remove the pin
(18) from the wheel axle (16).
3. Put the pin (18) and the holes in the
wheel's rim (7) and wheel axle.
4. Close the pin (18).
5. Repeat on the other side.
Fitting of the guard for the bottom
handlebar
1. Remove the screws (19) and locking ring
and washers from both sides of the
machine.
2. Position the guard (4) on machine and
secure with the screws (19).
P. Lindberg A/S
Tel.: +45 70212626
6
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9059961 EN V2
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk