Enter key using navigation keys on remote or >>| <<| buttons on front panel to choose
correct number/letter and press "ENTER" on remote or "TUNE" knob on front panel to
confirm.
When whole key is entered correctly choose
cancel.
Radio will connect.
10.6 Time Setup
Please go chapter 7. Setting the time and date
10.7 Factory Reset
Go to "MAIN MENU"
Use navigation key LEFT on remote to go back in the menu. Press several times until
"MAIN MENU" is an option in the menu. Choose "MAIN MENU" by pressing "ENTER" on
remote or "TUNE" knob on front panel. From the main menu choose "System setup" From
system setup choose "Factory reset" Display will show:
Press 'INFO' to
confirm reset
Press "SETUP/INFO" on remote to confirm reset. By doing this the radio will restart with
the factory settings. This also means that all connections has to be configured again. A
factory reset may be necessary if the radio is not functioning correctly or menu/display is
acting up.
10.8 Software upgrade
Used for upgrading software from factory server. Before You try to download a new
software version, check on our download server (http://hobbyradio.de/DAB) whether such
updates are available or not.
10.9 Info
Choose "Info". Display will show:
>SW version
Radio ID
Choose "SW version" to see the software version.
Choose "Radio ID" to see the unique ID of your radio. This can be used to create an
account on http://www.wifiradio-frontier.com/
to proceed. Choose "<" to clear and "C" to
- 21 -