Hama 00173103 Bedienungsanleitung Seite 7

4.2 Automatic Bluetooth connection
(after successful pairing)
• Make sure that your Bluetooth-capable
terminal device is on and Bluetooth is
activated.
• Make sure that your Bluetooth-capable
terminal device is visible for other Bluetooth
devices.
• Make sure that the speaker is located within
the Bluetooth range of max. 10 metres.
• Switch the On/Off switch (5) to the ON
position to switch the speaker on. The
device emits a sound to indicate that it is
ready for operation.
• After successful connection, the blue LED
indicator (7) will flash.
• Start and stop audio playback on your
terminal device or using Play/Pause (3) on
the speaker.
4.3 Hands-free function
You can use the speaker as a hands-free set
for your mobile phone. For this function,
the mobile phone must be connected to the
speaker via Bluetooth.
• Make sure that your mobile phone is
connected to the Bluetooth speaker.
• If you receive a call on your mobile phone,
an announcement of the telephone number
will play.
• Press Call (3) to accept the call.
• Press Call (3) again to end the call.
Note – Call quality
To increase the call quality, make sure that
you are near the speaker with your mobile
phone during the call.
4.4 Battery charging function
• Connect the included USB charging cable to
the speaker's USB socket (6).
• Connect the unused plug on the USB cable
to an available USB port on your computer
or another suitable USB device.
• The LED indicator (7) will light up in red
during active charging. If the battery is
fully charged, the red LED indicator (7)
will go out.
• Please charge the speaker for at least 4
hours before using it for the first time.
5. Care and Maintenance
Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents.
5