Hama 00173103 Bedienungsanleitung Seite 6

• The speaker automatically searches for a
connection. The blue LED display (7) flashes.
• Open the Bluetooth settings on your
terminal device and wait until Hama
Speaker appears in the list of Bluetooth
devices found.
• Select Hama Speaker and wait until you
hear the speaker emit a sound and the
speaker is listed as connected in the
Bluetooth settings on your terminal device.
• Start and stop audio playback on your
terminal device or using Play/Pause (3) on
the speaker.
Note – Bluetooth password
Some terminal devices require a password
in order to connect to another Bluetooth
device.
• If your terminal device requests a
password for connection with the
speaker, enter 0000.
4
Note – Connection impaired
After the speaker and terminal device have
been paired, a connection is established
automatically. If the Bluetooth connection
is not established automatically, check
the following:
• Check the Bluetooth settings of your
terminal device to see whether Hama
Speaker is connected. If not, repeat the
steps listed under Bluetooth pairing.
• Check whether your terminal device
and the speaker are less than 10
metres apart. If not, move them closer
together.
• Check whether obstacles are impairing
the range. If so, move the devices
closer together.
• Check whether the audio cable is
connected to the speaker. If so,
disconnect it.