The Optical Drive; Loading And Removing A Disc; Loading A Disc - Medion 98320 Bedienungsanleitung

The Optical Drive

Loading and Removing a Disc

In contrast to optical drives in a desktop All-In-One PC, your All-In-One PC uses a
holder to lock the disk.
Attention!
Do not place protective foils or other stickers on your CD's. To avoid
damage to your drive, do not use deformed or damaged CD's. Atten-
tion: Do not use scratched or dirty discs, discs with pieces broken off or
discs of poor quality. Because of the high speeds in the drive the discs
might break and damage your data as well as your drive. Examine the
discs before you enter them. If damage or dirt is visible, you should not
use them.
Damage caused by faulty media is excluded from warranty and any re-
pair will be charged.

Loading a Disc

1. With the device turned on,
press the eject button on the
optical drive to open the tray.
2. Pull the tray out completely with care.
3. Place the disc on the tray so that it
lays flat with the label facing forward.
push the disc right onto the locking
mechanism so that it can lock in po-
sition.
The Hard Drive
holder
37